TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c . Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
O-ring (Item 75, Appendix K)
Pan, Drain, 4-Gallon (MIL-P-45819)
O-ring (Item 78, Appendix K)
Tool Kit, General Mechanic's: Automotive
O-ring (Item 79, Appendix K)
(SC 5180-90-N26)
O-ring (2) (Item 83, Appendix K)
Materials/Parts
Equipment Condition
Grease (Item 17, Appendix E)
Load removed from the BAP (para 2-12)
Rag (Item 21, Appendix E)
BAP unloaded from the CBT (para 2-10)
Lockwasher (2) (Item 36, Appendix K)
NOTE
1
Use a drain pan to catch fluid
draining from hoses and fit-
tings. Wipe up any spillage
with a rag.
2
a. Removal.
(1) Loosen both ends of two tubes (1 and
2) on two elbows (3 and 4). Loosen
two captive nuts (5 and 6) and remove
elbows (3 and 4) and two O-rings (7
and 8) from BAP winch hydraulic
motor (9). Discard O-rings.
1
3
(2) Remove tube (10) from elbow (11).
(3) Remove tube (12) from elbow (13) on
10
motor (9). Remove other end of tube
5
13
(12) from elbow (14).
7
(4) Loosen captive nut (15) and remove
elbow (13) and O-ring (16) from motor
11
15
(9). Remove elbow (14) and adapter
16
9
(17) from winch housing (18). Discard
18
O-ring.
8
6
2
4
17
12
14
