TM 5-5420-234-14&P
4-41. BAP CENTER ROLLER HYDRAULIC SYSTEM REPAIR (continued).
(2) Remove screw (4), lockwasher (5), and retainer (6) from BAP frame (7). Discard lockwasher.
(3) Lift and move center roller assembly (8) toward rear of the BAP until tabs on rear carriage (9) align with
two notches in track (10) of frame (7), then lift center roller assembly (8) clear of frame (7).
7
9
10
4
5
10
6
9
8
(4) Remove two screws (11) and lockwashers (12) from rear carriage (9) and two BAP center roller hydraulic
cylinders (13). Discard lockwashers. Remove hydraulic cylinders (13) from rear carriage (9).
(5) Remove two hydraulic hoses (14) and elbows (15) from two hydraulic cylinders (13). Remove two
fittings (16) from manifold (17) and hydraulic hoses (14).
17
14
9
16
11
13
12
REAR CARRIAGE
REMOVED FOR CLARITY
15
13
4-494
