TM 5-5420-234-14&P
4-39. BAP WINCH ASSEMBLY REPLACEMENT (continued).
c. Installation.
WARNING
The winch assembly without cable weighs approximately 350 pounds (158.9 kg).
Winch must be secured by a suitable lifting device before installing it on BAP winch
frame. Failure to follow this warning could result in death or injury to personnel and
equipment damage.
(1) With the aid of an assistant, use lifting device to lift winch assembly (29) into position on winch frame
(15), and make sure all four mounting pads (33) of winch assembly (29) are flush with winch frame (15)
mounting surface.
(2) Install four bolts (30), new lockwashers (31), and nuts (32) on winch frame (15) and winch assembly
(29). Remove lifting device.
32
31
29
30
15
4-487
