TM 5-5420-234-14&P
4-40. BAP WINCH MOTOR ASSEMBLY REPLACEMENT (continued).
(21) from base of motor (9). Discard lockwashers and O-ring.
(6) Loosen captive nut (22) and remove elbow (11) and O-ring (23) from motor (9). Discard O-ring.
22
11
18
23
9
21
19
20
b. Installation.
(1) Coat new O-ring (21) with grease and install on base of motor (9). Install elbow (11) and new O-ring
(23) to align with the end of tube (10) when motor (9) is installed on winch housing (18).
CAUTION
Be careful not to damage new O-ring by pinching it between the winch motor base
and the winch housing when installing winch motor.
(2) Carefully position motor (9) on winch housing (18), and install two bolts (19) and new lockwashers (20)
on winch housing (18).
4-491
