TM 5-5420-234-14&P
4-40. BAP WINCH MOTOR ASSEMBLY REPLACEMENT (continued).
(3) Install adapter (17) on winch housing
(18). Install elbow (14) on adapter
(17), but do not tighten. Install tube
1
(2) on elbow (14).
(4) Install elbow (13) and new O-ring
(16) on motor (9) to align with tube
(12). Install tube (12) on elbow (13).
2
Install captive nut (15) on motor (9).
Install elbow (14) on adapter (17).
(5) Install tube (10) on elbow (11), then
tighten captive nut (22) on motor (9).
(6) Install two elbows (3 and 4) and new
O-rings (7 and 8) on motor (9), then
1
3
install two captive nuts (5 and 6) on
motor (9).
10
5
(7) Tighten both ends of two tubes (1 and
13
2) on two elbows (3 and 4).
7
11
15
16
9
18
8
6
2
4
17
12
14
c. Follow-on Maintenance:
Load the BAP on the CBT (para 2-9).
Operate BAP winch and check for leaks (para 2-11).
Turn off engine (TM 9-2320-279-10).
Add hydraulic fluid to winch (Appendix G).
Add hydraulic fluid to Transporter, as needed (LO 9-2320-279-12).
END OF TASK
4-492
