TM 5-5420-234-14&P
4-39. BAP WINCH ASSEMBLY REPLACEMENT (continued).
NOTE
Reuse the 8 long bolts that supported
pivot plates from old winch assembly
during installation.
29
(3) Remove four bolts (27) temporarily reinstalled
in winch assembly (29) during removal. Install
four bolts (27) and new lockwashers (28) and
27
pivot plate (22) on winch assembly (29). Install
28
other pivot plate (22) in the same manner.
(4) Install six screws (23) and nuts (24), two upper
cable guide retainers (18), and roller assembly
(25) on carriage (21). Install two grease fittings
28
(26) on ends of roller assembly (25).
27
22
guide shaft (20) onto carriage (21) and two pivot
plates (22). Install two new cotter pins (17) and
upper cable guide shaft (16) on two upper cable
19
guide retainers (18).
20
14
15
22
14
12
12
13
13
22
19
21
26
24
25
17
23
18
26
16
18
17
16
4-488
