TM 5-5420-234-14&P
NOTE
During all Transporter operations, the operator will drive and be responsible for the
operation of the LHS cab control box. The assistant acts as a ground guide and will
be responsible for directing the operator using hand signals, operating the remote
control box and winch, and assisting the operator as needed.
1
2
a. Secure winch frame to the BAP. Make sure both winch
frame locking levers (1) are in the up position. If locking
levers (1) are not up:
(1)
Remove lockpin (2) from each locking lever (1).
(2)
Swing each locking lever (1) to the up position.
(3)
Insert lockpin (2) into each locking lever (1).
b.
Make sure air hose (3) located on road side of the BAP is in the stowed position, connected to elbow (4).
3
4
