TM 5-5420-234-14&P
4-39. BAP WINCH ASSEMBLY REPLACEMENT (continued).
(2) Remove two hydraulic tubes (3) from two elbows (4). Loosen two captive nuts (5), then remove two
elbows (4) and O-rings (6) from winch motor (7). Remove tube (8) from elbow (9). Discard O-rings.
(3) Remove pipe plug (10) from end cover (11), and drain oil into a suitable container. Install pipe plug (10)
in end cover (11).
8
4
3
5
6
7
9
2
1
6
5
4
3
10
11
4-483