TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
c. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmfuI vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(1) Coat both sides of gasket (1) with
silicone adhesive-sealant and install
gasket on hydraulic motor (2).
(2) Install hydraulic motor (2) on winch
brake (3) with two screws (4) and
lockwashers (5).
d. Follow-on Maintenance. Install
self-recovery winch counterbalance valve (para 16-5).
END OF TASK
16-4. SELF-RECOVERY WINCH HYDRAULIC MOTOR REPAIR.
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Solvent, dry cleaning, Item 57, Appendix C
Grease, ball bearing, lithium base, Item 35,
Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
Self-recovery winch
hydraulic motor on clean
work surface.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
16-9
