TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
12 screws (19) and
Install preformed packing (17) on motor end drum hub (8).
Aline motor end drum hub (8) with pins (18) and install with
Iockwashers (20).
Tighten screws (19) to 90 to 95 lb-ft (122 to 129 N·m) in sequence shown.
Install two plugs (21).
Install two preformed
packings (22).
Support drum (15) with suitable
lifting device and install gear end
support (23) and motor end
support (24).
Install poppet valve (25).
Remove lifting device.
d. Follow-on Maintenance. None.
END OF TASK
16-7
