TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-3. SELF-RECOVERY WINCH HYDRAULIC MOTOR REMOVAL/iNSTALLATION.
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-on Maintenance
I
INITIAL SETUP
Models
Equipment Condition
All
TM or Para
Condition Description
Test Equipment
Para 16-5
Self-recovery winch
None
counterbalance valve
Special Tools
removed.
None
Special Environmental Conditions
Supplies
None
Solvent, dry cleaning, Item 57, Appendix C
General Safety Instructions
Adhesive-sealant, silicone, Item 6, Appendix C
None
Personnel Required
Level of Maintenance
MOS 63W, Wheel vehicle repairer
Direct Support
References
None
a. Removal.
(1) Place suitable container under
hydraulic motor (1) to catch oil.
(2) Remove two screws (2),
lockwashers (3), hydraulic
motor (1), and gasket (4) from
winch brake (5).
b. Cleaning/lnspection.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1) Clean all metal parts in dry cleaning
solvent.
(2) Inspect all mating surfaces for scratches
(3) Replace all scratched or damaged parts.
and burrs.
16-8
