TM 5-5420-234-14&P
4-71.1 CAB CONTROL BOX REPLACEMENT (MODEL B
ONLY).
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Batteries disconnected (TM 9-2320-279-20)
(SC 5180-90-N26)
Engine OFF (TM 9-2320-279-10)
a. Removal.
(1) Remove eight screws (1) and washers (2) from
cab control box (3).
NOTE
Digital cab control box cannot be
repaired and should not be disassembled.
(2) Lift cab control box (3) out of vehicle and
remove cab control box wiring harness (4) from
bottom of cab control box (3).
1
b. Installation.
(1) Connect cab control box wiring harness (4) to
2
bottom of cab control box (3).
(2) Position cab control box (3) in vehicle and
secure with eight screws (1) and washers (2).
3
4
c. Follow-on Maintenance:
Connect batteries (TM 9-2320-279-20).
END OF TASK
Change 1