TM 5-5420-234-14&P
4-71. CAB CONTROL BOX ASSEMBLY REPAIR (MODEL A ONLY) (continued).
(19) Remove two screws (50) and switches (51) from joystick (52).
(20) Remove four locknuts (53), screws (54) and joystick (52) from cab control box (10). Discard locknuts.
NOTE
Perform Step 21 only if damaged.
(21) Remove and discard four decals (55) from cab control box (10).
55
10
54
52
51
50
53
c. Assembly.
NOTE
Perform Step 1 only if decals were removed during removal.
(1) Install four decals (55) on cab control box (10).
NOTE
When properly installed, joystick should move side to side.
(2) Install joystick (52) in cab control box (10) with four screws (54) and new locknuts (53).
(3) Install two switches (51) on joystick (52) with two screws (50).
4-590
-590
Change 1
