4-71.2 CAB INTERFACE WIRING HARNESS REPLACEMENT (MODEL B ONLY)
(continued).
(2) Install wire 1680 (13) onto circuit breaker one (14).
(3) Position heater compartment side panel (12) and
secure with eight screws (10) and washers (11).
1
ground (9).
2
(5) Install wire 1473 (6) onto circuit breaker nine (7).
(6) Install wire 1843 (4) onto high idle switch (5).
3
(7) Position heater compartment top panel (3) and
secure with six screws (1) and washers (2).
5
4
9
8
6
7
c. Follow-on Maintenance:
Connect cab interface harness to main LHS wiring harness (para 4-70.1).
Install cab control box (para 4-71.1).
Connect batteries (TM 9-2320-279-20).
Change 1
4-593
