TM 5-5420-234-14&P
4-71. CAB CONTROL BOX ASSEMBLY REPAIR (MODEL A ONLY) (continued).
NOTE
Perform Step 17 only if gasket was removed during removal.
11
(17) Install gasket (16) on plate (12) with gasket adhesive.
10
(18) Install circuit board (14) on plate (12) with
six screws (15).
(19) Connect six connectors (13) on circuit
board (14).
(20) Install cab control box (10) on plate
(12) with six screws (11).
15
12
d. Installation.
(1) Install cab control box (10) in vehicle (4) with
four new lockwashers (9) and screws (8).
(2) Connect three connectors (5), (6) and (7).
14
13
16
(3) Install cover (3) on vehicle (4) with four new
lockwashers (2) and screws (1).
6
10
3
8
5
9
1
2
~
7
e. Follow-on Maintenance:
4
Connect batteries (TM 9-2320-279-20).
END OF TASK
4-59593
4- 2.1
Change 1
