TM 5-5420-234-14&P
4-71. CAB CONTROL BOX ASSEMBLY REPAIR (MODEL A ONLY) (continued).
b. Disassembly.
CAUTION
Use care when removing cab control box from plate. Cab control box is connected
to plate with wires. Failure to comply may result in damage to equipment.
(1) Remove six screws (11) and cab control box (10) from plate (12).
NOTE
Tag and mark all wires, connectors, terminals, circuit breakers and switches
prior to removal.
(2) Disconnect six connectors (13) from circuit board (14).
(3) Remove six screws (15) and circuit board (14) from plate (12).
NOTE
Perform Step 4 only if damaged.
(4) Remove gasket (16) from plate (12).
11
10
15
12
14
13
16
445587
- - 87
Change 1
