TM 5-5420-234-14&P
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
d. Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Rag (Item 21, Appendix E)
Tool Kit, General Mechanic's:
Lockwasher (2) (Item 34, Appendix K)
Automotive (SC 5180-90-N26)
Equipment Condition
Materials/Parts
Load removed from the BAP (para 2-12)
Drycleaning Solvent (Item 13, Appendix E)
BAP unloaded from the CBT (para 2-10)
Rear guide in full open position (para 2-12)
a. Removal.
(1) Remove two bolts (1) and lockwashers (2) and plate clamp (3) from axle (4). Discard lockwashers.
(2) Remove BAP rear roller assembly (5) and shim (6) from axle (4).
b. Cleaning and Inspection.
(1) Remove grease fitting (7) from end of axle (4).
(2) Inspect all parts for damage. Replace damaged parts as necessary.
4
6
5
3
2
1
7
2
1
