TM 5-5420-234-14&P
4-28. BAP REAR GUIDE REPAIR (continued).
(4) Replace grease fitting (26) on reaction bracket (20) only if damaged.
NOTE
Rear guide pad prevents metal-to-metal contact between the BAP and bridge
bay sections during launch/recovery operations.
(5) Inspect rear guide pad (3) for damage and/or wear. Replace rear guide pad (3) if worn within 1/16 inch
(1.6 mm) from head of screws (1) or exposes metal on rear guide (4).
c. Installation.
(1) Install spring (25) on latch pin (24).
(2) Install latch pin (24) in frame (14).
(3) Install latch handle (23) on latch pin (24), and install new spring pin (22) in latch handle (23).
(4) Install reaction bracket (20) and washer (21) on lock bracket (8).
(5) Install screw (15), rubber bumper (16), two spacers (17), washer (18), and new self-locking nut (19) on
reaction bracket (20) and lock bracket (8).
(6) Install lock bracket (8), washer (12), screw (9), and new lockwasher (10) in rear guide (4).
(7) Tap pivot pin (13) into frame (14).
2
(8) Install new cotter pin (11) on pivot
pin (13).
9
3
(9) Install four screws (5), new
lockwashers (6), and nuts (7) and
10
lock bracket (8) on rear guide (4).
4
(10) Install rear guide pad (3) and 11
7
screws (1) and new self-locking nuts
(2) on rear guide (4).
6
1
8
5
4-441
