BAP REAR BUMPER ASSEMBLY REPLACEMENT.

TM-5-5420-234-14-P Truck Cargo 10-Ton 8x8 Common Bridge Transporter M1977 Without Winch Manual
Page Navigation
748

TM 5-5420-234-14&P

4-31. BAP REAR BUMPER ASSEMBLY REPLACEMENT.

This task covers:

Removal

b. Installation

c. Follow-on Maintenance

INITIAL SETUP

Tools and Special Tools

Equipment Condition

Tool Kit, General Mechanic's:

Load removed from the BAP (para 2-12)

Automotive (SC 5180-90-N26)

BAP unloaded from the CBT (para 2-10)

Materials/Parts

Cotter Pin (Item 20, Appendix K)

NOTE

This task can be used for the road-side, curb-side, or middle roller bumpers.

The middle roller bumpers are shown.

a. Removal.

(1) Remove cotter pin (1) from bumper shaft (2). Discard cotter pin.

(2) Remove bumper shaft (2) and three roller bumpers (3) from BAP frame (4).

(3) Lubricate bumper shaft (2) and bumpers (3) in accordance with Appendix G.

b. Installation.

(1) Install three roller bumpers (3) and bumper shaft (2) on BAP frame (4).

(2) Install new cotter pin (1) in bumper shaft (2).

c. Follow-on Maintenance:

None.

END OF TASK

4-447