TM 9-2320-279-34-2
Suspension Maintenance Instructions (Cont)
14-4. LATERAL TORQUE ROD REMOVAL/INSTALLATION (CONT).
NOTE
There are two methods of attaching hoses to the front lateral torque rod. Do step (7)
for method A. Do step (8) for method B.
Steps (7) and (8) apply to both methods.
(7)
Install two clamps (14) and two hose clips (15) with two screws (16), washers (17),
lockwashers (18), and nuts (19).
(8)
Install two clamps (20) and two hose clips (21) with four lockwashers (22) and nuts (23).
c.
Follow-on Maintenance. Aline all axles (para 14-7).
END OF TASK
14-5.
EQUALIZER BEAM ASSEMBLY (FRONT TANDEM) REMOVAL/REPAIR/
INSTALLATION.
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
INITIAL SETUP
d. Assembly
e. Installation
f. Follow-on Maintenance
Models
All
Test Equipment
None
Special Tools
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Adapter, center bushing, removing Y-861
Adapter, center bushing, installing Y-862
Adapter, end bushing, replacing Y-855-A
Clamp, adapter, end bushing Y-856
Supplies
Grease, automotive and artillery, Item 34,
Appendix C
Solvent, drycleaning, Item 57, Appendix C
Preventive, rust, Item 53, Appendix C
Paper, abrasive, garnet (emery cloth),
Item 51, Appendix C
Equipment
Condition
TM or Para
Condition Description
Vehicle on level surface.
Special Environmental Conditions
None
General Safety Instructions
Wheels chocked.
Level of Maintenance
Direct Support
14-14
Change 2
