TM 9-2320-279-34-2
Suspension Maintenance Instructions (Cont)
I 14-2. SPRING REMOVAL/REPAIR/iNSTALLATION (CONT). I
(8) Install screw (11), spacer (12), and locknut (13).
NOTE
Slot in pin faces down.
(9) Install pin(14).
(10) Install two screws (15), four washers (16), and two locknuts (l7).
(11) Install grease fitting (18).
NOTE
Use cross pattern when tightening screws.
(12) Soldier A and Soldier B tighten screws (land 6)and nuts (9)to300 lb-ft(4O6Nm).
(13) Remove lifitng device.
h. Follow-on Maintenance.
(1) Install wheel assemblies (TM 9-2320-279-10).
(2) Remove wheel chocks (TM 9-2320-279-10).
(3) Install shock absorbers (TM 9-2320-279-20).
END OF TASK
I 14-3. DELETED. I
14-10
