TM 9-2320-279-34-2
Suspension Maintenance Instructions (Cont)
NOTE
Left and right sides are
installed in the same way. Left
side is shown. Axles are not
shown for clarity.
(3) Install two intermediate
tubes (3) in each equalizer
beam (2).
(4) Raise equalizer beams (2)
into position with suitable
lifting devices.
NOTE
Screw on axle No. 1 right side
and axle No. 2 left side must
be installed with beam end
adapter.
(5) Install four beam end adapters (4) in each equalizer beam (2).
(6) Install four washers (5), two screws (6), and nuts (7) in each equalizer beam (2). Tighten to
210 to 240 lb-ft (285 to 325 N-m).
(7) Install two saddle caps (8), four washers (9), and nuts (10) on each equalizer beam (2). Tighten
nuts in 1-4-3-2 order, to 225 to 275 lb-ft (305 to 373 N-m).
(8) Remove lifting device from under each equalizer beam (2).
(9) Raise front of vehicle, remove jackstands, and lower front of vehicle.
f. Follow-on Maintenance. Aline steering system (para 12- 10).
END OF TASK
14-19