TM 9-2320-279-34-2
Suspension Maintenance Instructions (Cont)
a. Removed.
TA191130
NOTE
. Left and right sides are removed in the same way. Left side is shown. Axles not
shown for clarity.
• Center lifting device under center of cross tube so both equalizer beams can be
lowered evenly.
(1) Remove four nuts (l), washers (2), and two saddle caps (3).
NOTE
Tires must touch ground after vehicle frame is supported.
(2) Raise front of vehicle with suitable lifting device until gap of approximately 1/4 in. (6 mm)
appears between saddle (4) and center bushing (5).
(3) Support front of vehicle with two jackstands.
14-15
