TM 9-2320-279-34-2
Suspension Maintenance
(10) Raise lifting device under equalizer beam (18)
enough to allow removal of supports under
frame.
9. Rear Spring Installation (M984E1).
Instructions (Cont)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
AXLES REMOVED
FOR CLARITY
Coat threads of two screws (1) with lubricating oil. Install screws and two washers (2) in saddle
cap (3).
Position saddle cap (3) and screws (1) on spring (4).
Attach suitable lifting device to spring (4).
Soldier A and Soldier B position spring (4) on saddle (5).
Coat threads of two screws (6) with lubricating oil. Install screws and two washers (7) in saddle
cap (3) and saddle (5).
Soldier A installs four washers (8) and nuts (9) on screws (1 and 6) while Soldier B holds screws.
Do not tighten.
Coat threads of two setscrews (10) with lubricating oil. Install setscrews. Tighten setscrews to
150 lb-ft (203 N-m).
14-9
