TM 9-2320-279-34-2
Suspension Maintenance Instructions (Cont)
Section III. LATERAL TORQUE ROD AND EQUALIZER BEAMS
14-4.
LATERAL TORQUE ROD REMOVAL/INSTALLATION.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
M o d e l s
All
Test Equipment
None
Special Tools
None
Supplies
Oil, lubricating, Item 47, Appendix C
Tags, identification, Item 60, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
There are three lateral torque rods. Front lateral torque rod is shown
There are two methods of attaching hoses to the front lateral torque rod. DO step (1)
for method A. Do step (1.1) for method B.
(1)
Remove two nuts (1), lockwashers (2), screws (3), washer (3.1), hose clips (4), and clamp (5).
(1.1) Remove four nuts (5.1), lockwashers (5.2), two hose clips (5.3), and clamps (5.4).
Change 2
14-11