TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-16.
REAR COVER AND FIRST CLUTCH ASSEMBLY REMOVAL/REPAIR/
INSTALLATION. (CONT).
(4)
(5)
Position rear cover (1) on side. Use
wooden block for support.
Remove output shaft (7) from rear
cover (1).
(6)
Press output shaft (7) from bearing (8),
spacer (9), and speedometer drive
gear (10).
(7)
Screw long screw (11) into small orifice
plug (12). Pry up on screw to remove
plug.
(8)
Remove bushing (13) from output
shaft (7).
7-108
Change 3
