TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-15. FORWARD CLUTCH ASSEMBLY REMOVAL/REPAIR/INSTALLATlON (CONT).
(36)
Install fourth clutch driving hub (10) on forward clutch assembly (1).
(37)
Install large inner retaining ring (23) on fourth clutch driving hub (10).
(38)
Lubricate and install two seal rings (24) on turbine shaft (13).
e.
Installation.
WARNING
Be sure forward clutch hub and fourth clutch driving hub are installed in the
forward clutch assembly. If these two hubs are installed into the fourth clutch
housing, the transmission will operate in reverse when the driver selects any
forward range.
(1)
Install outer race (1), roller bearing (2), and inner race (3) on fourth clutch assembly (4) in
transmission housing (5).
7-104
Change 3
