TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
(5) Install suiting lifting device to rear
cover (9).
(6)
Soldier A guides rear cover (9) off and away
from transmission (1) while Soldier B operates
lifting device. Soldier B removes lifting device.
(7)
Remove gasket (10) from transmission (1).
NOTE
Some clutch assemblies contain paper
friction plates. Discard all paper friction
plates. They are replaced by graphite
friction plates.
(8)
Remove two steel plates (11),
one friction plate (12), and rear
planetary ring gear (13) from
transmission housing (1).
(9)
Remove five friction plates (12)
and five steel plates (11) from
transmission housing (1).
b.
Disassembly.
(1)
(2)
(3)
Set rear cover (1) on wooden blocks.
Remove nut (2), yoke (3), and output
shaft bearing retaining ring (4).
Remove plug (5), plug (6), plug (7),
and bushing (8) from rear cover (1).
Change 3
7-107
