TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-16. REAR COVER AND FIRST CLUTCH ASSEMBLY REMOVAL/REPAlR/
INSTALLATION (CONT).
(9)
(10)
(11)
CAUTION
Accuracy of location and alinement with the governor bore is critical when
installing pin.
Install governor support pin (7) in rear
cover (8) to a depth of 5.886 to 5.896 in. (149.50
to 149.76 mm).
Coat inner seal ring (9) and outer seal
ring (10) with lubricating oil.
Install inner seal ring (9) and outer seal
ring (10) on first clutch piston (3) with lips
facing down.
(12)
Install first clutch piston (3) in rear
cover (8).
(13)
Install two dowel pins (11 and 12) and
set pins height to 0.36 to 0.40 in. (9.14
to 10.16 mm) above the face of the
cover.
7-112
Change 3
