TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-66. LADDER BRACKET REMOVAL/lNSTALLATION (M984E1).
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
M984E1
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Ladder removed.
None
Special Environmental Conditions
Supplies
None
None
General Safety Instructions
Personnel Required
None
MOS 63S, Heavy wheel vehicle mechanic
a. Removal.
(1) Remove two nuts (1), screws (2) and bracket (3).
(2) Remove cotter pin (4) and pin (5) from bracket (3).
b. Installation.
(1) Install pin (5) with cotter pin (4) in bracket (3).
(2) Install bracket (3) with two screws (2) and nuts (1).
c. Follow-on Maintenance. Install ladder (TM 9-2320-279-10).
END OF TASK
16-235
