TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
(8) Remove four screws (24) and data
plate (25) from door (6).
c. Assembly.
(1) Install data plate (1) on door (2) with
four screws (3).
(2) Install strap (4) on door (2) with
screw (5) and nut (6).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death keep
away from open fire and use in a
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
All gaskets are installed the same way.
(3) Coat bottom of gasket (7) with silicone adhesive-sealant and install on door (2).
(4) Coat ends of gasket (7) with silicone adhesive-sealant to seal gap.
16-231
