TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-68.
WRECKER BODY SUPPORTS (FRAME-MOUNTED) REMOVAL/INSTALLATION
(M984E1).
(5)
Attach suitable lifting device and remove eight nuts (10), lockwashers (11), screws (12), and
rear wrecker body support assembly (13).
NOTE
Note position of biscuits.
(6)
Remove two locknuts (14), washers (15),
washers (16), biscuits (17), screws (18),
and washers (19) from two supports (20
and 21).
(7) Remove support (21).
(8)
Remove two washers (22) and
biscuits (23) from support (20).
b. Installation
NOTE
Position biscuits in proper location.
(1)
Install two biscuits (1), two washers (2),
and support (3) on support (4).
(2)
Install two washers (5) and screws (6)
through supports (3 and 4).
(3)
Install two biscuits (7), washers (8),
washers (9), and locknuts (10).
(4)
Tighten locknuts (10) to 275 lb-ft (373
N•m).
16-238
Change 2
