TM 9-2320-279-20-2
Cab and Body Maintenance Instructions (Cont)
16-69. HEEL REST REMOVAL/lNSTALLATlON
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
M977, M978, M983, M985, M984E1
References
None
Test Equipment
None
Special Tools
None
Supplies
Compound, walking, Item 54, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Equipment Condition
TM or Pam
Condition Description
TM 9-2320-279-10 Shut off engine.
Special Environmental Conditions
None
General Safety Instructions
None
a.
Removal.
(1)
Remove two nuts (1), lockwashers (2),
washers (3), and screws (4).
(2)
Remove heel rest angle (5) from heel
rest bracket (6) and foot rest plate (7).
(3)
Remove two locknuts (8), washers (9),
and screws (10).
(4)
Remove heel rest bracket (6) from foot
rest plate (7).
b. Installation.
(1)
Apply walking compound to contact
surface of heel rest bracket (6).
(2)
Install heel rest bracket (6) on foot rest
plate (7) with two screws (10),
washers (9), and locknuts (8).
(3)
Install heel rest angle (5) on foot rest
plate (7) and heel rest bracket (6) with
two screws (4), washers (3),
lockwashers (2), and nuts (1).
c.
Follow-on Maintenance. None.
END OF TASK
16-240
Change 2
