TM 9-2320-279-20-2
Cab and Body Maintenance instructions (Cont)
b. Disassembly.
NOTE
All rods and brackets are removed the same
way.
All lower doors are removed the same way.
Upper doors are welded. Refer to TM 9-237
for removal.
(1) Remove locknut (1) and spring (2) from
rod (3).
(2) Remove cotter pin (4), washer (5), and rod (3)
(3)
(4)
from lower door (6).
Remove lower door (6).
Remove two screws (7), nuts (8), and
bracket (9) from lower box (10).
NOTE
latches are removed the same way.
All
Bend down tabs on tab washer to
remove.
Note position of spring washer.
(5)
All
(6)
(7)
Remove screw (11), pawl (12), nut (13),
tab washer (14), spring washer (15),
plate (16), stop washer (17), screw (18),
and handle (19) from door (6).
NOTE
gaskets are removed the same way.
Remove gasket (20) from door (6).
Remove nut (21), screw (22), and
strap (23) from door (6).
16-230
