TM 5-5420-234-14&P
4-88. RIGHT HAND LINKING HARNESS REPLACEMENT (MODEL A ONLY) (continued).
NOTE
Connector should be installed with notch facing up.
(10) Install connector (2) and cap (1) on bracket (6) with four screws (5), new lockwashers (4) and nuts (3).
(11) Install cap (1) on connector (2).
1
5
~
3
4
2
6
1
(12) Close junction box cover (9) and tighten four screws (8).
(13) Close hydraulic cabinet cover (7).
7
8
9
c. Follow-on Maintenance:
Connect batteries (TM 9-2320-279-20).
END OF TASK
4-649
-649
Change 1
