TM 5-5420-234-14&P
4-88. RIGHT-HAND LINKING HARNESS REPLACEMENT (MODEL A ONLY) (continued).
(3) Open hydraulic cabinet cover (7).
(4) Loosen four screws (8) and open
7
junction box cover (9).
(5) Remove black/brown wire no. 9L (10)
8
from terminal no. 9 (11) and blue wire no.
7C (12) from terminal no. 7 (13).
9
(6) Remove orange wire no. 33D (14) from
terminal no. 33 (15) and yellow wire no.
35E (16) from terminal no. 35 (17).
(7) Remove brown wire no. 17F (18) from
terminal no. 17 (19) and red/black wire no.
13G (20) from terminal nn. 13 (21).
(8) Remove blue/black wire no. 30H (22) from terminal no. 30 (23) and orange/black wire no. 31I (24) from
terminal no. 31 (25).
(9) Remove black wire no. 8A (26) from terminal no. 8 (27) and red wire no. 4B (28) from terminal no. 4
(29).
(10) Remove yellow/black wire no. 23J (30) from terminal no. 23 (31) and brown/black wire no. 27K (32)
from terminal no. 27 (33).
NOTE
Note position of rubber grommet prior to removal.
34
(11) Remove nut (34), plastic insert (35), rubber grommet (36),
and right-hand linking harness (37) from junction box (38).
36 35
37
(12) Remove right-hand linking harness (37) from vehicle (39).
(13) Remove rubber grommet (36), plastic insert (35), and nut
38
(34) from right-hand linking harness (37).
39
26 10
12
20
18
22
32
28
24
30
14
16
19
29
13
17
27
11
21
31
33 23 25 15
OTHER HARNESSES
REMOVED FOR CLARITY
Change 1
4
4-647