TM 5-5420-234-14&P
4-89. WINCH (IN) HARNESS REPLACEMENT (MODEL A ONLY) (continued).
NOTE
Install cable ties as required.
(2) Install new gasket (15) and connector (14) on directional control valve (16) and tighten screw (13).
(3) Position winch (in) harness (12) in junction box (11).
(4) Install rubber grommet (10), plastic insert (9), and nut (8) on junction box (11).
(5) Install black wire no. 36 (6) on terminal no. 36 (7) and white wire no. 35 (4) on terminal no. 35 (5).
(6) Close junction box cover (3) and tighten four screws (2).
(7) Close hydraulic cabinet cover (1).
1
2
11
5
7
3
16
4
6
15
14
10
9
13
8
12
c. Follow-on Maintenance:
Connect batteries (TM 9-2320-279-20).
OTHER WIRE HARNESSES
END OF TASK
REMOVED FOR CLARITY
Change 1
4--651
4 65
