TM 5-5420-234-14&P
4-87. OIL TEMPERATURE SENSOR AND HARNESS REPLACEMENT (MODEL A ONLY)
(continued).
b. Installation.
NOTE
Ensure rubber grommet is installed as noted during removal.
(1) Install rubber grommet (10), plastic insert (9), and nut (8) on oil temperature harness (11).
NOTE
Install cable ties as required.
If screws in bracket were loosened during removal, tighten screws upon
completion of Step 2.
(2) Install oil temperature sensor (13) in bracket (14).
(3) Position oil temperature harness (12) in junction box (11).
(4) Install rubber grommet (10), plastic insert (9), and nut (8) on junction box (11).
(5) Install black wire no. 2 (6) on terminal no. 2 (7) and white wire no. 1 (4) on terminal no. 1 (5).
(6) Close junction box cover (3) and tighten four screws (2).
(7) Close hydraulic cabinet cover (1).
1
3
2
c. Follow-on Maintenance:
Connect batteries (TM 9-2320-279-20).
END OF TASK
4-645
Change 1
4-6
