TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Locknut (2) (Item 67, Appendix K)
Tool Kit, General Mechanic's: Automotive
Lockwasher (4) (Item 87, Appendix K)
(SC 5180-90-N26)
Equipment Condition
Materials/Parts
Batteries disconnected (TM 9-2320-279-20)
Tag, Identification (as required) (Item 23,
a. Removal.
(1) Open hydraulic cabinet cover (1).
(2) Loosen four screws (2) and open junction box cover (3).
CAUTION
The hourmeter assembly is still attached by two wires upon completion of Step 4. Do
not pull on the hourmeter assembly or damage to equipment may result.
(4) Remove two locknuts (6), screws (4), lockwashers (5), and hourmeter assembly (7) from junction box
cover (3). Discard locknuts.
4
5
2
6
3
7
1
5
4
Change 1
