TM 5-5420-234-14&P
4-61. MAIN JUNCTION BOX REPAIR (MODEL A ONLY) (continued).
c. Assembly.
WARNING
Adhesives, solvents and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin. To avoid injury or death, keep away from open fire
and use in well ventilated area. If adhesives, solvent or sealing compound gets on skin
or clothing, wash immediately with soap and water.
(1) Apply silicone adhesive-sealant around holes for screws (30).
(2) Install two terminal strips (31) in junction box (28) with four screws (30) and new locknuts (29).
(3) Install 14 sealing washers (27) and connectors (26) in junction box (28) with nuts (25).
(4) Install jumper wire (24) on terminal no. 16 (6) and terminal no. 18 (8).
(5) Install jumper wire (22) on terminal no. 7 (3) and terminal no. 10 (23).
(6) Install jumper wire (20) on terminal no. 34 (19) and terminal no. 36 (21).
(7) Install jumper wire (18) on terminal no. 32 (17) and terminal no. 34 (19).
(8) Install jumper wire (16) on terminal no. 26 (15) and terminal no. 32 (17).
23
6
3
8
24
22
18
16
21
20
15
17
19
Change 1
4--559
4 55
