TM 5-5420-234-14&P
4-62. HOURMETER REPLACEMENT (MODEL A ONLY) (continued).
NOTE
Tag and mark wires prior to removal.
(5) Remove white wire no. 25 (8) and black wire no. 24 (9) from hourmeter assembly (7).
(6) Position hourmeter assembly (7) on work bench.
7
9
NOTE
8
Note position of hourmeter prior
to removing to ensure proper
installation.
(7) Remove two locknuts (10), rear retainer
(11), and hourmeter (12) from bracket (13).
Discard locknuts.
b. Installation.
NOTE
Ensure hourmeter is installed in
10
same position as noted during
removal.
(1) Install hourmeter (12) in bracket (13) with
retainer (11) and two new locknuts (10).
11
NOTE
White wire no. 25 is installed on
positive terminal.
(2) Install black wire no. 26 (9) and white wire
no. 25 (8) on hourmeter assembly (7).
13
12
4-
Change 1
4-562
