TM 5-5420-234-14&P
4-63. HOURMETER HARNESS REPLACEMENT (MODEL A ONLY) (continued).
(7) Remove white wire no. 25 (8) from terminal no. 25 (14) and black wire no. 26 (9) from terminal no. 26
(15).
(8) Remove hourmeter harness (13) from junction box cover (3).
3
13
9
8
15
14
OTHER WIRE HARNESSES REMOVED FOR CLARITY
b. Installation.
(1) Position hourmeter harness (13) in junction box cover (3).
(2) Install black wire no. 26 (9) on terminal no. 26 (15) and white wire no. 25 (8) on terminal no. 25 (14).
NOTE
Ensure rubber grommet is installed in same position as noted during removal.
(3) Position rubber grommet (12) over hourmeter harness (13) and install plastic insert (11) and nut (10).
NOTE
White wire no. 25 is installed on positive terminal.
(4) Install black wire no. 26 (9) and white wire no. 25 (8) on hourmeter assembly (7).
4-
Change 1
4-566
