TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Wheels chocked (TM 9-2320-279-10)
(SC 5180-90-N26)
Engine turned off (TM 9-2320-279-10)
Materials/Parts
Locknut (4) (Item 53, Appendix K) (Model A only)
Locknut (6) (Item 53, Appendix K) (Model B only)
a. Removal.
NOTE
Perform step (1) for Model A only.
(1) Remove four locknuts (1), screws (2), and stop plate (3) from vehicle (4). Discard locknuts.
(2) Remove six locknuts (1), screws (2), and stop plate (3) from vehicle (4). Discard locknuts.
b. Installation.
NOTE
Perform step (1) for Model A only.
(1) Install stop plate (3) on vehicle (4) with four screws (2) and new locknuts (1).
(2) Install stop plate (3) on vehicle (4) with six screws (2) and new locknuts (1).
3
1
2
MODEL A SHOWN
4
c. Follow-on Maintenance:
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 1
