TM 5-5420-234-14&P
4-52. LHS HORIZONTAL ROLLER REPLACEMENT (continued).
NOTE
Locknut is installed properly when locknut is tightened and roller does not
bind.
(4) Install thrust washer (5), new lockwasher (4), new locknut (3) and lube fitting (2) on roller (6). Tighten
locknut.
(5) Bend tab of lockwasher (4) into slot of locknut (3).
6
4
1
2
5
3
(6) Remove lifting device from horizontal roller (6).
c. Follow-on Maintenance:
Lubricate roller assembly (Appendix G).
Install angled rollers (para 4-53).
Install roller assembly (para 4-51).
END OF TASK
4--535
4 537
