TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Wheels chocked (TM 9-2320-279-10)
(SC 5180-90-N26)
Engine OFF (TM 9-2320-279-10)
Materials/Parts
Locknut (4) (Item 71, Appendix K)
Cotter Pin (Item 22.1, Appendix K)
Locknut (6) (Item 5.2, Appendix K)
Locknut (4) (Item 5.3, appendix K)
NOTE
Procedures are identical for both sides
of truck. Left side shown.
a. Removal.
(1) Remove two screws (5) and self-locking
nuts (7) from socket bracket (6). Pull
socket bracket (6) and mud flap assembly
away from frame.
(2) Remove cotter pin (12) from bracket (2)
and remove bracket (2) from socket bracket
2
(6). Discard cotter pin.
3
(3) Remove three bolts (4) and self-locking
7
nuts (3) from mud flap (11) and bracket (2).
Remove mud flap (11) from bracket (2).
9
Discard self-locking nuts.
6
8
4
(4) Remove two screws (8), self-locking nuts
(10), and reflector (9) from mud flap (11).
5
Discard self-locking nuts.
12
11
10
Change 1
