TM 5-5420-234-14&P
4-55.1. REAR FENDER REPLACEMENT (MODEL B ONLY) (continued).
a. Removal.
8
13
10
6
1
3
2
9
5
12
11
7
4
14
NOTE
Both rear fenders are removed the same way. The right fender is shown.
Mark all wires before disconnecting.
(1) Remove two screws (1), reflector (2), and
reflector bracket (3) from fender (4).
(2) Remove six push clips (5) and marker lamp
7
wiring harness (6) from fender support arm
(7).
(3) Remove self-tapping screw (8) from fender
support arm (7). Discard self-tapping screw.
(4) Remove two locknuts (9) and screws (10) from
fender support arm (7). Discard locknuts.
17
(5) Remove locknut (11), washer (12), and screw
(13) from fender support arm (7) and fender
brace (14). Discard locknut.
(6) Remove rear fender (15) from fender support
arm (7).
18
15
(7) Remove four locknuts (16), screws (17), and
16
two braces (18) from rear fender (15). Discard
locknuts.
4-540.2
Change 1
4
