TM 5-5420-234-14&P
4-54. REAR BUMPER REPLACEMENT (MODEL A ONLY) (continued).
7
b. Installation.
NOTE
Perform Step 1 only if winch opening panel was
5
removed.
(1) Install winch opening panel (17) on rear bumper (5) with
three screws (16) and new locknuts (15).
8
6
(2) With the help of an assistant, install rear bumper (5) on
vehicle (14) with four screws (13) and locknuts (12).
(3) Install two angle brackets (11) on rear bumper (5) with two
screws (10) and locknuts (9).
(4) Install six clips (8) on rear bumper (5) with six screws (7)
and locknuts (6).
(5) Install two mudflaps (4) and retaining plates (3) on bumper
(5) with six screws (2) and new locknuts (1).
12
11
9
14
5
12
15
17
1
13
13
10
16
3
4
2
c. Follow-on Maintenance:
Install rear red reflectors (TM 9-2320-279-20).
Install rear side marker lights (TM 9-2320-279-20).
Install rear marker light and mounting bracket (para 4-65).
Install stop plate (para 4-55).
END OF TASK
Change 1
4-4-41 9
5 53
