TM 5-5420-234-14&P
4-38. BAP CABLE ASSEMBLY REPLACEMENT (continued).
c. Assembly.
(1) Install new latch (17), spring (18), and rivet (16) on hook (13).
(2) Slide hook holder (11) over cable (5) until cable (5) is fully seated in hook holder (11).
11
17
16
12
5
18
14
10
15
13
13
(3) Install two spacers (14), hook (13), and pin (12) in hook holder (11). Make sure pin (12) is installed with
groove under setscrew (10).
8
(4) Install setscrew (10) in hook holder (11).
5
9
d. Installation.
(1) Install cable (5) through pulley (8) and
rollers (9) and on winch (6).
7
6
4-480
