TM 5-5420-234-14&P
4-38. BAP CABLE ASSEMBLY REPLACEMENT (continued).
NOTE
Make sure cable is fully wrapped around wide end of cable anchor and lies along groove of cable
anchor. Small end of cable anchor goes into cable anchor slot first.
(2) Install cable (5) through cable anchor slot and around cable anchor (4). Firmly seat cable anchor (4) in
cable anchor (4) slot of winch (6).
(3) Install two cable guide springs (1) on cable guide (2) and two mounting brackets (3).
3
1
7
5
4
6
3
1
CABLE ANCHOR SLOT
2
c. Follow-on Maintenance:
Reel in winch cable (para 2-12).
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
4-481
