TM 5-5420-234-14&P
4-36. BAP SHEAVE ASSEMBLY REPAIR (continued).
(3) Remove cotter pin (9) from roller pin (10). Remove roller pin (10), two spacers (11), and roller
assembly (12) from winch frame (4). Discard cotter pin.
(4) Remove cotter pin (13) from pulley pin (14). Remove pulley pin (14), two spacers (15), and pulley (16)
from winch frame (4). Discard cotter pin.
(5) With the aid of an assistant, remove cotter pin (17) from roller pin (18). Remove roller pin (18), two
spacers (19), and roller assembly (20) from winch frame (4). Discard cotter pin.
14
20
19
15
19
4
16
9
15
10
11
18
12
11
13
17
b. Cleaning and Inspection.
WARNING
Drycleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;
use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and DO
NOT breathe vapors. Keep away from heat or flame. Never smoke when using
drycleaning solvent; the flashpoint for Type II is 140 degrees F (60 degrees C), and
for Type III it is 200 degrees F (93 degrees C). Failure to follow this warning may
result in death or injury to personnel.
(1) Clean parts with drycleaning solvent and a rag.
(2) Inspect all parts for damage that would make the parts unserviceable. Replace damaged parts.
4-467
